Stationery 2019-03-04T16:00:00+00:00

STATIONERY

EQUIPMENT FOR STATIONERY

In this traditional area IML offers some new solutions for personalized products as well as semi and fully automatic lines for :

  • Production of ring binders and various clips;
  • Production of lever arch files and other stationery products;

For more details on machinery related to paper converting, download the general catalog of IML:  IML General Catalogue

  • Pneumatic, double headed, riveting/eyeleting machine:
    B 122
  • Machine for automatic feeding of ring mechanisms to the riveting machine
    CA 122
  • Creasing machine:
    CV 60
  • Automatic creasing machine:
    CV 60/A
  • Automatic creasing machine:
    CV 60/A-A
  • Milling machine with automatic feeder:
    CV 120/A
  • Automatic unloading for milling machine:
    SC1 + CV 120/A
  • Unloading and piling station for higher speed machines:
    SC2
  • Automatic machine for production of lever arch files:
    BABY LAF
  • Automatic machine for production of lever arch file:
    SPEEDY LAF
  • Automatic unpacking for the automatic line:
    DIS 2
  • Pneumatic, double headed riveting /eyeleting machine:
    B 122/S
  • Four – headed eyeleting machine for fixing of lever arch mechanisms on files:
    OM 16
  • Semiautomatic machine for fixing rado and finger hole eyelets on files:
    OM 12/C
  • Automatic machine for fixing rado and finger hole eyelets on files:
    OM 12/A
  • Super automatic machine for fixing rado and finger hole eyelets on files:
    OM 12/A-A
  • Punching eyeleting machine:
    OM 15
  • Special machine to assembe eyelets oval covers of sample books:
    OM 15/2 Special
  • Machine for fixing finger hole eyelets (hole punching and eyelets fixing not simultaneous):
    OM 15/S
  • Pneumatic machine for simultaneous fixing of two edge protectors on files:
    OM 13
  • Single head automatic machine for fixing edge protectors on files:
    OM 113
  • Double headed automatic machine for fixing edge protectors on files:
    OM 113/2
  • Hot welding machine for automatic welding of l abel holders in PP or PVC on files:
    SI 180
  • Automatic machine for welding PP/PVC holders on various folders and binders with automatic i nserting of the labels:
    SI 180/A 
  • Electro-pneumatic semiautomatic machine for welding PP/PVC pockets with automatic inserting of the label:
    SI 181

MACHINES FOR THE PRODUCTION OF FOLDERS WITH RING AND VARIOUS PRESSURE MECHANISMS

PNEUMATIC, DOUBLE HEADED, RIVETING/EYELETING MACHINE B 122

Description

The machine is designed for the application of two rivets/eyelets for the fixing of various products on folders etc. at the same time. Minimum distance adjustment 60 mm max 400 mm. (It is also possible to order in the electric version on request).

Technical details

  • Eyelets/Rivets: On request.
  • Cardboard thickness: da 0,5 a 4 mm.
  • Capacity: up to 12 pieces/minute*.
  • Compressed air: 5 NL/cycle (pressure 6 bar).
  • Dimensions:
    L= 1500 mm;
    P= 1000 mm;
    H= 1500 mm.
    Weight: Kg. 250.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML B 122

MACHINE FOR AUTOMATIC FEEDING OF RING MECHANISMS TO RIVETING MACHINE CA 122

Description

The machine can load automatically the ring mechanisms, various types, on the fixing anvils (our model B 122 or another model to be specified). The operator loads through a magnetic handle a complete plateau of mechanisms which are collected from the package box.

Technical details

  • Used mechanisms: Varies.
  • Capacity: up to 14 pieces/minute*.
  • Compressed air: 5 NL/cycle (pressure 6 bar).
  • Voltage: 400 Volt 3 phase + N – 50 Hz.
  • Overall Dimensions CA122: L= 800 mm; P= 1400 mm; H= 1800 mm.
  • Overall Dimensions CA122 + B122: L= 1500 mm; P= 1800 mm; H= 1800 mm.
  • Weight: Kg. 140.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML CA 122

CREASING MACHINE CV 60

Description

The machine performs creasing of various types of cardboard. The distance between the creases and their thickness is adjustable.

Technical details

  • Used Material: Board, Coated board, Fiber boards or similar.
  • Cardboard thickness: 0,5 to 3,5 mm.
  • Capacity: up to 10 pieces/minute* (2 creasing).
  • Voltage: 400 Volt – 50 Hz.
  • Dimensions: L= 1350 mm; P= 1000 mm; H= 1250 mm.
  • Weight: Kg. 350.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML CV 60

AUTOMATIC CREASING MACHINE CV 60/A

Description

The machine makes the creasing on various types of cardboard at one stroke. The width and depth of the creases is adjustable by special levers and wheels. The number of creases and the distances between the creases can be adjusted by help of a computer. There is also a possibility of saving various creasing configurations
in the computer’s memory.

Technical details

  • Used Material: Board, Coated board, Fiber boards or similar.
  • Cardboard thickness: 0,5 to 3,5 mm.
  • Capacity: up to 20 pieces/minute* (2 creasing).
  • Voltage: 400 Volt – 50 Hz.
  • Dimensions: L= 1000 mm; P= 2300 mm; H= 1250 mm.
  • Weight: Kg. 500.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML CV 60-A

AUTOMATIC CREASING MACHINE CV 60/A-A

Description

  • Used Material: Board, Coated board, Fiber boards or similar.
  • Cardboard thickness: 0,5 to 3,5 mm.
  • Capacity: up to 30 pieces/minute* (2 creasing).
  • Voltage: 380 Volt – 50 Hz.
  • Dimensions: L= 1100 mm; P= 2800 mm; H= 1400 mm.
  • Weight: Kg. 700.

Technical details

  • Used Material: Board, Coated board, Fiber boards or similar.
  • Cardboard thickness: 0,5 to 3,5 mm.
  • Capacity: up to 30 pieces/minute* (2 creasing).
  • Voltage: 380 Volt – 50 Hz.
  • Dimensions: L= 1100 mm; P= 2800 mm; H= 1400 mm.
  • Weight: Kg. 700.
Worked Product Image

Multimedia and Download

MILLING MACHINE WITH AUTOMATIC FEEDER CV 120/A

Description

The machine can make one or more grooves in the grey cardboard with special cutting knives previously adjusted by the operator. Cardboard feeding is automatic. The removed chips fall on a separate belt. After grooving, the boards are placed on to a delivery tray. By using rotary knives, the machine can be used to cut board strips and case boards (2nd passage).

Technical details

  • Used Material: Greyboard.
  • Cardboard thickness: 1 to 4 mm.
  • Capacity: 0,60 mt/sec*.
  • Voltage: 400 Volt 3 phase + N – 50 Hz.
  • Overall dimensions: L= 1550 mm; P= 2300 mm; H= 1230 mm.
  • Weight: Kg. 820.

Worked Product Image

Multimedia and Download

AUTOMATIC UNLOADING FOR MILLING MACHINE SC1 + CV 120/A

Description

The automatic unloading of the milling machine CV120/A. The operator can set up the number of the folders to be piled on.

Technical details

  • Used Material: Greyboard.
  • Cardboard thickness: 1 to 4 mm.
  • Capacity: 0,60 mt/sec*.
  • Voltage: 400 Volt 3 phase – 50 Hz.
  • Overall dimensions: L= 1550 mm; P= 3700 mm; H= 1300 mm.
  • Weight: Kg. 1100.

Worked Product Image

Multimedia and Download

UNLOADING AND PILING STATION FOR HIGHER SPEED MACHINES SC2

Description

The machine can be connected to various kinds of machines, for example CV 120/A or CV 60/ A or to the automatic case makers. The machine allows to unload and pile the product of the machine to which it is connected, so that the production process is faster and constant.

Technical details

  • Cardboard thickness: 0,5 to 4 mm.
  • Voltage: 400 Volt – 50 Hz.
  • Total power: 3 Kw.
  • Dimensions: L= 1800 mm; P= 2000 mm; H= 1400 mm.
  • Weight: Kg 600.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML SC2

MACHINES FOR THE PRODUCTION OF FOLDERS WITH LEVER MECHANISMS

AUTOMATIC MACHINE FOR PRODUCTION OF LEVER ARCH FILES BABY LAF

Description

This automatic line for production of complete lever arch files is composed of: flats prefeeder,z flats feeder, creasing, punching and fixing of finger hole eyelets, fixing of lever arch mechanisms, punching and fixing of rado eyelets, feeding of compressor bars. Assembled files go out from the machine automatically and are ready for packing.

Technical details

  • Used Material: Coated board, Fiber boards, or similar.
  • Eyelets/Rivets: On request.
  • Cardboard thickness: 1 mm to 2,5 mm.
  • Capacity: up to 20 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 50 NL/cycle (6 bar).
  • Overall Dimensions: L= 4300 mm; P= 2700 mm; H= 1800 mm.
  • Weight: Kg. 1000.

Worked Product Image

Multimedia and Download

AUTOMATIC MACHINE FOR PRODUCTION OF LEVER ARCH FILE SPEEDY LAF

Description

This machine is a high speed automatic line. It can be composed of various station based on the customer’s requirements. If needed any station can be excluded from the assembling process without influencing on the high machine production capacity.

Technical details

  • Used Material: Coated board, Fiber boards, or similar.
  • Eyelets/Rivets: On request.
  • Cardboard thickness: 1 mm to 3mm.
  • Capacity: up to 60 pieces/minute.
  • Voltage: 400 Volt 3 phase.
  • Compressed air: 150 NL/ciclo (7bar).
  • Overall Dimensions: L= 13000 mm; P= 2200 mm; H= 2000 mm.
  • Weight Kg: 7500.

Worked Product Image

Multimedia and Download

AUTOMATIC UNPACKING FOR AUTOMATIC LINE DIS 2

Description

This automatic unpacking station takes the lever arch mechanisms out from the boxes and put them on the automatic line for fixing of the mechanisms on the files. On request it’s possible to install this station on any kind of machine.

Technical details

  • Mechanisms type: On request.
  • Capacity: up to 50 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 5 NL/cycle (6 bar).
  • Overall Dimensions: L= 2650 mm; P= 1260 mm; H= 1800 mm.
  • Weight: Kg. 270.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DIS 2

PNEUMATIC, DOUBLE HEADED RIVETING / EYELETING MACHINE B 122/S

Description

The machine can apply the lever mechanisms on the files. The mechanism is positioned by the operator on an appropriate device then he proceeds to the fixing of the first two rivets/eyelets. After rotating the device, in a second cycle he will apply the other two (on request, It is also possible to order the machine in the electric version).

Technical details

  • Eyelets/Rivets: On request.
  • Cardboard thickness: da 0,5 a 4 mm.
  • Capacity: up to 7 pieces/minute.
  • Compressed air: 5 NL/cycle (pressure 6 bar).
  • Dimensions: L= 1500 mm; P= 1000 mm; H= 1500 mm.
  • Weight: Kg. 270.

Worked Product Image

Multimedia and Download

FOUR-HEADED EYELETING MACHINE FOR FIXING OF LEVER ARCH MECHANISMS OM 16

Description

This electric machine performs fixing of lever arch mechanism by four rivets at one stroke. The mechanism is placed in the right position by the operator. The cardboard flats are fed into the machine manually as well. The machine is available in pneumatic version on request.

Technical details

  • Used Material: Eyelets item “221” ÷ 17 etc.
  • Cardboard thickness: 1 to 3 mm.
  • Capacity: up to 12 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Overall dimensions: L= 450 mm; P= 600 mm; H= 1400 mm.
  • Weight: Kg. 110.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML OM 16

SEMIAUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/C

Description

This electro pneumatic machine punches the cardboard and fix rado and finger hole eyelets at the same time. The eyelets must be put manually into the feeders.

Technical details

  • Used Material: Board, coated board, Fiber boards or similar.
  • Eyelets: On request.
  • Cardboard thickness: 1 to 2,5 mm.
  • Capacity: up to 7 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 5 NL/minute (pressure 7 bar).
  • Overall dimensions: L= 920 mm; P= 650 mm; H= 1500mm.
  • Weight: Kg. 210.

Worked Product Image

Multimedia and Download

AUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/A

Description

This electro-pneumatic machine punches and fix rado and finger hole at the same time. The eyelets are fed automatically from automatic feeder. The cardboard flats must be fed to the machine manually.

Technical details

  • Used Material: Coated board, Fiber boards or similar.
  • Eyelets: On request.
  • Cardboard thickness: 1 to 2,5 mm.
  • Capacity: up to 12 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 10 NL/minute (pressure 7 bar).
  • Overall dimensions: L= 920 mm; P= 650 mm; H= 1600 mm.
  • Weight: Kg. 390.

Worked Product Image

Multimedia and Download

SUPER AUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/A-A

Description

This electro-pneumatic machine punches and fix rado and finger hole eyelets at the same time. The eyelets are fed automatically from automatic feeders. The cardboard flats are also fed automatically.

Technical details

  • Used Material: Coated board, Fiber boards or similar.
  • Eyelets: On request.
  • Cardboard thickness: 1 to 2,5 mm.
  • Capacity: up to 17 pieces/minute.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 15 NL/minute (pressure 7 bar).
  • Overall dimensions: L= 3000 mm; P= 800 mm; H= 1700 mm.
  • Weight: Kg. 580.

Worked Product Image

Multimedia and Download

PUNCHING EYELETING MACHINE OM 15

Description

This electric (220 V) punching machine performs automatic fixing of finger hole eyelets on the files or boxes.

Technical details

  • Eyelets type: Item 935 ÷ 915 and others.
  • Materials: Coated board, Fiber boards or similar.
  • Cardboard thickness: 1 to 3 mm.
  • Capacity: up to 15 pieces/minute.
  • Electrical power req.: 0,1 Kw.
  • Voltage: 220 Volt single-phase.
  • Overall dimensions: L= 800 mm; P= 700 mm; H= 1650 mm.
  • Weight: Kg. 160.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML OM 15

SPECIAL MACHINE TO ASSEMBLE EYELETS OVAL COVERS OF SAMPLE BOOKS OM 15/2 SPECIAL

Description

Electro-pneumatic machine with four heads for simultaneous application of two central eyelets (for inserting the cord-handle) (at adjustable distance). The throat depth of central heads is 350 mm.

Technical details

  • Eyelets: On request.
  • Cardboards labels: da 0,5 a 3 mm.
  • Capacity: up 10 pieces/minute*.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 15 NL/cycle (pressure 6 bar).
  • Overall Dimensions: L= 1550 mm; P= 1500 mm; H= 1500 mm.
  • Weight: Kg. 300.

Worked Product Image

Multimedia and Download

MACHINE FOR FIXING FINGER HOLE EYELETS (HOLE PUNCHING AND EYELETS FIXING NOT SIMULTANEOUS) OM 15/S

Description

The machine is performing two automatic cycles: first hole punching, second eyelet fixing. Finger hole eyelets are fixed with high quality results on every type of board.

Technical details

  • Eyelets type: Item 935 ÷ 915 and others.
  • Used Material: Coated board, Fiber boards or similar.
  • Cardboard thickness: 1 to 3 mm.
  • Capacity: up to 12 pieces/minute.
  • Electrical power req.: 0,1 Kw.
  • Voltage: 220 Volt single-phase.
  • Compressed air: 1 NL / cycle (pressure 6 bar).
  • Overall dimensions: L= 800 mm; P= 700 mm; H= 1650 mm.
  • Weight: Kg. 180.

Worked Product Image

Multimedia and Download

PNEUMATIC MACHINE FOR SIMULTANEOUS FIXING TWO EDGE PROTECTORS ON FILES OM 13

Description

The machine performs fixing of two edge protectors at the same time. The edge protectors are placed in the right position by the operator and then pressed by the machine.

Technical details

  • Used Material: Coated board, Fiber boards or similar.
  • Edge protector size: On request.
  • Cardboard thickness: 1,5 to 2,8 mm.
  • Capacity: 500 pieces/hour.
  • Compressed air: 8 NL/minuto (6 bar).
  • Dimensions: L= 900 mm; P= 460 mm; H= 1000 mm.
  • Weight: Kg. 110.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML OM 13

SINGLE HEAD AUTOMATIC MACHINE FOR FIXING EDGE PROTECTORS ON FILES OM 113

Description

The machine performs fixing of the edge protectors formed from the steel strip. The cardboard flats are fed to the machine by the operator.

Technical details

  • Used Material: Coated board, Fiber boards or similar.
  • Tinned metal strip dimensions: 7 x 0,25 mm.
  • Corner size: Short side 30 mm; long side min 30÷260 mm.
  • Cardboard thickness: 1,7 to 2,8 mm.
  • Capacity: 800/1000 applications/hour.
  • Compressed air: 20 NL/minuto (7 bar).
  • Overall dimensions: L= 1500 mm; P= 1600 mm; H= 1450 mm.
  • Weight: Kg. 500.

Worked Product Image

Multimedia and Download

DOUBLE HEADED AUTOMATIC MACHINE FOR FIXING EDGE PROTECTORS ON FILES OM 113/2

Description

The machine performs fixing of the edges protectors formed from the steel strip. The cardboard flats are fed to the machine by the operator.

Technical details

  • Used Material: Coated board, Fiber boards or similar.
  • Tinned metal strip dimensions: 7 x 0,25 mm.
  • Corner size: Short side 30 mm; long side min 30÷260 mm.
  • Cardboard thickness: 1,7 to 2,8 mm.
  • Capacity: 800/1000 applications/hour.
  • Voltage: 400 volt trifase + neutro – 50hz
  • Compressed air: 30 NL/minuto (7 bar).
  • Overall dimensions: L= 3300 mm; P= 1200 mm; H= 1400 mm.
  • Weight: Kg. 920.

Worked Product Image

Multimedia and Download

HOT WELDING MACHINE FOR AUTOMATIC WELDING OF LABEL HOLDERS IN PP or PVC ON FILES SI 180

Description

This electro/pneumatic machine can cut from the roll and apply automatically the label window in PP/PVC on the file. The operator must only place the file in the appropriate register position.

Technical details

  • Used Material: Coated board, PP PVC.
  • Cardboard thickness: 1 to 3,5 mm.
  • Capacity: up to 12 pieces/minute.
  • Electrical power req: 1,5 Kw.
  • Voltage: 220 Volt single phase.
  • Compressed air: 10 NL/cycle (6 bar).
  • Dimensions: L= 850 mm; P= 760 mm; H= 1500 mm.
  • Weight: Kg. 150.

Worked Product Image

Multimedia and Download

AUTOMATIC MACHINE FOR WELDING PP/PVC HOLDERS ON VARIOUS FOLDERS AND BINDERS WITH AUTOMATIC INSERTING OF THE LABELS SI 181

Description

This machine offers the possibility to weld the label window in PP or PVC and to insert its label at the same time. The operator can choose through special reference hand wheels the requested welding position on the folder: it is possible to weld different sizes of pockets and labels. The positioning of the folder must be done manually.

Technical details

  • Used material: Coated board, PP/PVC/PE.
  • Cardboard thickness: 1 to 3,5 mm.
  • Capacity: Up to 12 pieces/minute.
  • Voltage: 380 Volt – 50 Hz.
  • Total power: 5 Kw.
  • Compressed air: 50 NL / cycle (6 bar).
  • Dimensions: L= 1800 mm; P= 1300 mm; H= 1700 mm.
  • Weight: Kg. 350.

Worked Product Image

Multimedia and Download

ELECTRO-PNEUMATIC SEMIAUTOMATIC MACHINE FOR WELDING PP/PVC POCKETS WITH AUTOMATIC INSERTING OF THE LABEL SI 180/A

Description

This machine fix the label holder in PP or PVC inserting at the same time the label. The operator can choose the position of the label holder by mean of special regulation devise. The feeding of the folders, welding, labels inserting and putting out of the finished product are made automatically.

Technical details

  • Used Material: Coated board, PP PVC.
  • Cardboard thickness: 1 to 3,5 mm.
  • Capacity: up to 25 pieces/minute.
  • Electrical power req: 2 Kw.
  • Voltage: 400 Volt single phase.
  • Compressed air: 20 NL/cycle (6 bar).
  • Dimensions: L= 3900 mm; P= 2000 mm; H= 1750 mm.
  • Weight: Kg. 1000.

Worked Product Image

Multimedia and Download