DESCRIPTION
This machine is used to embed a book block into its cover; the operator must first place the inside of the book on the machine blade, then place the book cover over the block and then start the processing cycle. At this point the block is lowered as the two side gluers approach the block of the book to be encased and will deposit a light layer of vinyl glue on each side of the block, then this goes up as the cover approaches and is glued to it, so that the book is formed.
TECHNICAL DETAILS
- Material used: Paper, cardboard or other
- Production: 5 pieces/minute
- Voltage: 400 Volts Three Phase + Neutral – 50 Hz
- Total power: 2 Kw
- Pneumatic consumption: 10 NL/cycle (6 bar)
- Dimensions (L*W*H): 1000*1500*1400 mm
- Weight: Kg. 400
MACHINED PRODUCT
