PACKAGING

MACHINES FOR LUXURY PACKAGING IN SMALL AND MEDIUM QUANTITIES

The IML smart packaging solution is the answer to the growing demand for products with high added value in small and medium quantities and includes the equipment for processing and finishing of the board and cover material.

For more details on machinery related to packaging, download the catalog: IML General Catalogue

BROCHURE

If you are interested, you can download the Brochure for the presentation of packaging machines from the following link:  Packaging Brochure

PACKAGING VIDEO PRESENTATION

Look our new presentation video about Packaging Machinery.

SEMIAUTOMATIC GROOVING MACHINE DC 120

Description

This machine can make “V” or “U” shaped grooves on the cardboard. The operator feeds manually the cardboard sheet in the grooving machine, after adjusting the requested distance and depth of the creases. The machine will transport the board through the grooving station and deliver it to the operator’s side. The cut-off chips will be ejected on the rear side.

Technical details

  • Used Material: Greyboard;
  • Cardboard thickness: 0,5 to 4 mm;
  • Capacity: 0,60 mt/sec*;
  • Voltage: 380 Volt 3 phase – 50 Hz;
  • Overall dimensions: L= 1700 mm; P= 1300 mm; H= 1400 mm.
  • Weight: Kg. 1000.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DC 120

AUTOMATIC GROOVING MACHINE DC 120/A

Description

This machine can make “V” or “U” shaped grooves on the cardboard. The operator loads the cardboard sheets in a pile to the hopper , then he adjusts the distance of the grooving knives and the depth of the groove,and starts the working cycle. The final product will be delivered on the front side of the machine while the cut-off chips will be ejected on the rear side.

Technical details

  • Used Material: Greyboard;
  • Cardboard thickness: 0,5 to 4 mm;
  • Capacity: 0,60 mt/sec*;
  • Voltage: 380 Volt 3 phase – 50 Hz;
  • Overall dimensions: L= 1700 mm; P= 2100 mm; H= 1500 mm.
  • Weight: Kg. 1200.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DC 120/A

MANUAL GROOVING MACHINE DA 120 M

Description

This machine is equipped with 1 set of Knives for V cut to be chosen between 85°-105° or 100°-130° on request.

Technical details

  • Used material: Greyboard;
  • Cardboard thickness: 0,5 to 4 mm;
  • Dimensions: L= 1200 mm; P= 700 mm; H= 1150 mm.
  • Weight: Kg. 80.

Worked Product Image

Multimedia and Download

GROOVING MACHINE DA 140

Description

This machine can make “V” or “U” shaped grooves on the cardboard. The operator feeds manually the cardboard sheet in the grooving machine, after adjusting the requested distance and depth of the creases. The machine will transport the board through the grooving station and deliver it to the operator’s side. The cut-off chips will be ejected on the rear side.

Technical details

  • Used Material: Greyboard;
  • Cardboard thickness: 0,5 to 4 mm;
  • Capacity: 0,60 mt/sec;
  • Voltage: 400 Volt 3 phase + N – 50 Hz;
  • Overall dimensions: L= 2050 mm; P= 1300 mm; H= 1400 mm;
  • Weight: Kg. 1000.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page DA 140

AUTOMATIC MILLING MACHINE DA 140/A

Description

This machine can make “V” or “U” shaped grooves on the cardboard. The operator loads the cardboard sheets in a pile to the hopper, then he adjusts the distance of the grooving knives and the depth of the groove,and starts the working cycle. The final product will be delivered on the front side of the machine while the cut-off chips will be ejected on the rear side.

Technical details

  • Used Material: Greyboard.
  • Cardboard thickness: 0,5 to 4 mm.
  • Capacity: 0,60 mt/sec.
  • Voltage: 400 Volt 3 phase – 50 Hz.
  • Overall dimensions: L= 1950 mm; P= 2100 mm; H= 1650 mm.
  • Weight: Kg. 1200.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page DA 140-A

CORNER CUTTING DA 910

Description

This machine can be used to cut the corners of the cardboard to be used for rigid box manufacturing, after the grooving process. The second head can be used for paper cutting whereby the knife can be provided on the specifications of the customer.

Technical details

  • Material used: cardboard / paper;

  • Thickness: Max 4 mm;

  • Capacity: up to 30 cuts/ minute;

  • Compressed air: 100 NL/cycle (6 bar);

  • Air intake: pipe Rilsan  Ø 12 mm;

  • Overall dimensions: 800 x 800 x H1000 mm;

  • Weight: 300 kg.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DA 910

EDGE-CORNER TAPING DA 902

Description

This semiautomatic machine is used for application of a pre-glued paper strip on the edges of cardboard boxes. This allowes to keep the box in the right position for further covering and gives additional strength to the box itself. The paper is  cut to required size as programmed and pressed on the 4 edges of the machines one at the time. All the operations (length of the paper, temperature and dwell time) are set in the computer control.

Technical details

  • Max welding dimension ( length of paper strip): 140mm;

  • Voltage: 220 volt single phase;

  • Compressor air:  60 NL;

  • Air intake: pipe Rilsan  Ø 12 mm;

  • Power requirement: 1200 Watt;

  • Overall dimensions: 540 x 520 x H 1750 mm;

  • Net weight: 150 kg.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DA 902

3D PRINTER DA 905

Description

This electric 3D printer is used for making plastic components. The operator makes the drawing on the PC connected to the machine and equipped with a special program. It is possible to set the speed of the printer and optimize the quality of the final product according to specific requirements. The machine can work also in remote mode so that it can be connected directly with the manufacturer to download the file with the drawing of the item to print.

Technical details

  • Operating language: G Codefile;
  • Nozzle: Ø 8 mm;
  • Voltage: 220 Volt single phase;
  • Total power: 1200 Watt;
  • Overall dimensions: L= 1300 mm; P= 800 mm; H= 2100 mm.
  • Weight: Kg. 250.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DA 905

LASER CUTTING DA 906

Description

The machine is equipped with a computer to make the drawings, projects, logos etc.. The operator sets the power based on the type of the material used. This electric machine has a system for fume exhausting.

Technical details

  • Voltage: 220 Volt single phase;
  • Laser power: 130 Watt;
  • Machine power: 2 Kw;
  • Overall dimensions: L= 1900 mm; P= 1600 mm; H= 1020 mm;
  • Weight: Kg 450.

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DA 906

MANUAL GLUING MACHINE DA 175/1100

Description

This machine is a manual hot and cold gluing unit for paper and other materials, between 80 and 500 grsm . Additional equipment available for feeding of thicker products up to 5mm thickness. the machine is available in 3 version:

  • DA 175 F for use with cold glue only;
  • DA 175 C for use with hot and cold glue
  • DA 175 C + DA 100 as above including viscosity control unit  (Air intake , pipe Rilsan  Ø 12 mm, compressed air 300NL);

Technical details

  • DA 175: 1300 x 750 mm x H 1320 / Weight: 220 kg.

  • DA 1110: 1550 x 750 mm x H 1320 / Weight: 250 kg.
  • Voltage: 380V 3 phase +N or 220 volt single phase.
  • Used material: paper, cloth, PVC and other.
  • Power requirements: kW cold 1/5 hot.

  • Glue: cold glues or  hot animal.

Worked Product Image

Optional

  • Warehouse compartments for paper and cardboard.
  • Programmable timer for automatic glue ignition.
  • Variation of electronic speed with inverter.
  • Tips detach inverted sheet.
  • Reference teams for inserting sheets.
  • Glue heating tank with pneumatic pump and automatic viscosity control.
  • Inverter version Power supply 220 Volt.
  • Standard version 380 Volt power supply plus Neutral.
  • Roller hubs with self-cleaning scrapers.
  • Hot glue pan in bain-marie.
  • Heated paper-guide press.

Multimedia and Download

BOX WRAPPING AND FINISHING MACHINE DA 900

Description

This compact and simple machine is a good choice for small and medium producers of high quality boxes. The operator needs to feed the pre-formed box which has previously been assembled on the bottom with the pre-glued cover material. When the automatic cycle starts, accurate outside and inside wrapping and pressing are performed automatically, and the finished product will be automatically released.

Technical details

  • Capacity: up to 10 pieces/minute;

  • Voltage: 220 Volt;

  • Total power: 2,5 Kw;

  • Air intake: Pipe rilsan Ø 12 mm;

  • Compressed air: 20 NL /Minute (6 bar);

  • Dimensions: L= 1200 mm; P=1400 mm; H= 2200 mm;

  • Weight: Kg. 900.

DA 900 – Box Dimension

  • min 60 x 60 x H 10 mm
  • Max 430 x 350 x H 120 mm

DA 900 XL – Box Dimension

  • min 110 x 85 x H 10 mm
  • Max 650 x 450 x H 150 mm

Worked Product Image

Multimedia and Download

Download the PDF: Catalogue Page IML DA 900