BOOKBINDING

BOOKBINDING MACHINERY AND EQUIPMENT

In this area the solutions of Iml machinery represent an updated answer to the changing world of book production: short and medium runs, book-on-demand, photobooks, book-of-one are the inspiring criteria: we offer a wide range of machines for the productions of soft and hard cover books.

For more details on bookbinding equipment download the file:  IML General Catalogue

  • Automatic board cutting machine:
    DC 904
  • Manual casing-in machine:
    DA 500
  • Pressing and joint forming machine:
    DA 600
  • Hot melt gluing plotter:
    DA 700
  • Twin-head drill:
    TR 100
  • Double effect pneumaticbook press:
    DA 20 X

AUTOMATIC BOARD CUTTING MACHINE DC 904

Description

This automatic machine can be used to cut center strips and side boards for book cases. The operator sets the required width and feeds one board strip at time. Advancing according to preset measurements and cutting is done automatically. Particularly suitable for photobook cases and book-on-demand: by means of bar code reader (optional), the complete sizes of a case can be obtained in sequence.

Technical details

  • Used Material: Coated board, fiber board.
  • Cardboard thickness: 0,5 to 5 mm.
  • Capacity: up to 200 pieces/minute*.
  • Voltage: 400 Volt Three Phase + Neutral -50 Hz.
  • Total power: 1,5 Kw.
  • Overall dimensions: L= 1450 mm; P= 1000 mm; H= 1300 mm.
  • Weight: Kg. 550.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DC 904

MANUAL CASING-IN MACHINE DA 500

Description

The machine makes the casing in of the book content inside the cover. The operator places the content on the machine blade and then he places the book cover on the top. The lateral gluing devised spread vinyl glue on each side of the book content and after that the book cover is placed on it to conclude the gluing process.

Technical details

  • Used Material: Coated board, fiber board.
  • Capacity: up to 6 pieces/minute*.
  • Voltage: 380 Volt 3 phase – 50 Hz.
  • Compressed air: 10 NL/cycle (6 bar).
  • Overall dimensions:
    L= 1300 mm;
    P= 800 mm;
    H= 1600 mm.
    Weight: Kg. 300

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DA 500

PRESSING AND JOINT FORMING MACHINE DA 600

Description

This machine is designed for simultaneous pressing and joint forming of the book. The hydradraulic pressure is considerably high (up to 10 tons) and it can be adjusted by the operator with a pressure switch according to the requirement of the book to be processed.

Technical details

  • Pressure: Kg. 8000.
  • Voltage: 400 Volt 3 phase + N – 50 Hz.
  • Overall dimensions: L= 850 mm; P= 1400 mm; H= 1560 mm.
  • Weight: Kg. 700.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DA 600

HOT MELT GLUING PLOTTER DA 700

Description

The machine for putting one or more glue stripes on the book spine in various kinds of covering materials. The operation is made before the casing-in and before channel forming. It’s possible to set up the position, the length and the thickness of the stripes on the PLC connected to the machine.

Technical details

  • Voltage: 400 Volt 3 phase – 50 Hz;
  • Overall dimensions: L= 1570 mm; P= 1000 mm; H= 1300 mm;
  • Weight: Kg. 150.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DA 700

TWIN-HEAD DRILL TR 100

Description

This electro-pneumatic double head drill, can be adjusted in the distance between the holes, through a special hand wheel which activates the movement of one of the two heads. It is also possible to adjust the requested depth of the hole up to 50 mm, drill collets suitable for up to 12 mm diameter. Thanks to its special design the machine offers unique drilling solutions which would not be possible on traditional drilling machines.

Technical details

  • Hole depth: Da 0 a 50 mm;
  • Drilling speed: 900 tour/minute*;
  • Voltage: 400 Volt 3 phase + N – 50 Hz;
  • Dimensions:
    L= 1650 mm;
    P= 1000 mm;
    H= 1400 mm;
    Weight: Kg. 150.

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML TR 100

DOUBLE EFFECT PNEUMATIC BOOK PRESS DA 20 X

Description

The double effect book press DA 20 X is a pneumatic machine which can be used to press a pile of books once they have been cased-in. When the main platform moves upwards the operator can load second pile under the platform. In the downward movement after pressing, the second pile will be pressed and another pile will be loaded at the upper level a.s.o.

Technical details

  • Max pile height: 300 mm;
  • Max pressure: 2,5 Ton;
  • Compressed air: 1800 Nl/min @ 6 bar;
  • Dimension: L-1.200 mm; P-850 mm; H-2.000 mm.
  • Net weight: 400 kg;

Worked Product Image

Multimedia and Download

Download the PDF:  Catalogue Page IML DA 20 X