CASEMAKERS AND GLUING MACHINES

This automatic system of checking of the hot glue with its automatic correction is based on the principle of a sphere. The time of the falling down of the sphere inside the glue reports about its viscosity. It is possible to choose the required viscosity and maintain it stable.

The machine applies a line of cold glue (PVA) with adjustable width and thickness on various materials. The operator needs only to sec the front register guide in accordance with the required width of the glue line and the size of material to be glued, and to adjust the scraper in order to obtain a thinner or thicker glue application. After that, he can feed the material to be glued through the machine to achieve the required edge gluing.

This machine is a manual hot cold gluing unit for paper and others materials, between 80 and 500 grsm. Additional equipment available for feeding of thicker products up to 5 mm thickness. The machine is available in 3 version:

• DA 175 F for use with cold glue only;
• DA 175 C for use with hot and cold glue
• DA 175 C + DA 100 as above including viscosity control unit  (Air intake , pipe Rilsan  Ø 12 mm, compressed air 300NL);

This clamp operated manual machine, is used for turning-in of various kinds of covers. Turning-in is made 1 side per stroke. The machine is suitable for any kind of hot animal glue or PVA.

The machine is controlled by high-precision optical fiber, which does not require any size change. It has a double function: turning in and nip-roller. No maintenance is needed for the turning-in system.

Nip-roller with double adjustment for the thickness and pressing force. Silicon coated rollers for easy cleaning. It is possible, on demand, to equip the machine with automatic speed adjustment.

The machine is composed of gluing station for cold or hot glue, and is equipped with viscosity control to keep the glue density constant. On demand the machine is supplied with positioning device to make the positioning of the cardboard on the glued paper easier.

This vacuum table can be connected to any gluing or nip-rolling machine for the production of covers with paper or other materials. The machine can work with hot or cold glue, it is possible to process one single piece or more components to be covered. In this version in makes 2 sides on each cycle, is operated by foot pedal.

Arriving from the well known DA 1000 of which several units have been installed worldwide, this multi-functional gluing and case making machine
can produce folders, book cases and paper-over board products in short and medium quantities. The machine consists of guing unit for hot and cold glue (DA175) with automatic viscosity control (DA100) vacuum table (DA2000) with guides for the precise positioning of the cardboard pieces on the glued material, folding and pressing rollers (DA300) for turning-in of one side at a time, calender (DA400). Corner cutter DA 74/13 SB. Board hopper with semi-automatic feeding and positioning device DA200 available on request. The machine can work at up to 150 cycles per hour with one operator.

Arriving from the well known DA 1001 of which several units have been installed worldwide, this multi-functional gluing and case making machine can produce folders, book cases and paper-over board products in short and medium quantities. The machine consists of guing unit for hot and cold glue (DA175) with automatic viscosity control (DA100) vacuum table (DA2000) with guides for the precise positioning of the cardboard pieces on the glued material, folding and pressing rollers (DA301) for simultaneous turning-in of 2 sides at a time. Corner cutter S 74/13. The machine can produce up to 300 cases per minute with one operator.

Arriving from the well known DA 1001 of which several units have been installed worldwide, this multi-functional gluing and case making machine can produce folders, book cases and paper-over board products in short and medium quantities. The machine consists of guing unit for hot and cold glue (DA175) with automatic viscosity control (DA100) vacuum table (DA2000) with guides for the precise positioning of the cardboard pieces on the glued material, folding and pressing rollers (DA301) for simultaneous turning-in of 2 sides at a time. Corner cutter S 74/13. The machine can produce up to 300 cases per minute with one operator.

A result of the experience  with DA 1001 and DA 2002 Semi-Automatic Casemakers , this new model is particularly suitable for the production of :

• One, three and multiple-piece cases
• Book cases with rigid spine for photo books in short runs and one-off
• Cases with special shape for packaging
• Inside lining without gripper marks

Thanks to the ergonomic design, the machine can be operated by one person. 

ADJUSTMENTS KEPT TO A MINIMUM

In the Basic version, the operator has to adjust the board guides to a new size (the whole operation takes less than one minute). Optionally the machine can be equipped with automatic computer-controlled servo motors for guide setting and bar code readers for single case production. After feeding the cover material through the gluing station and placing it onto the vacuum table, the board is placed by the operator on the glued material and from here the assembled piece is fed to the 1^st roller folding station. The rest of the operation – 3 and 4side folding, corner tucking and pressing is done automatically, while the operator can already feed the next product.

In the Automatic version, all the adjustments for case and board size are performed automatically.

Additional bar code reading system and optional board cutting machine da 904 is special execution for photo book  case manufacturing. Bar code reading triggers the automatic setting of the machine. DA 904 provides simultaneous ‘on demand’ cutting of the side and spine boards according to the bar code readings.

Automatic modular casemaker for the production of folders can also be used for lining and gluing of 2 cardboard sheets together up to a maximun size of 1100 x 700 mm.

The machine is designed for production of 3-piece covers or 1-piece cases. The machine works with hot and cold glue. Once the cardboard and cover material have been glued, the vacuum table moves the product forward to the turning in station for the turning-in of the first 2 sides. When the corners are folded, the machine makes the turning-in of the remaining 2 sides. The turning-in is made by two counterposed clamps, which assure a perfect finish on any kind of material. As last production step, the product passes to nip rolling station.

The ideal cornering machine for the cutting at 45° of the cover material or to cut special shapes for round corners . Cutting unit with blade and counter blade. The cut of paper, laminated paper, canvas, buckrum, cardboard, etc is always perfect.

The ideal cornering machine for the cutting at 45° of the cover material or to cut special shapes for round corners. Cutting unit with blade and counterblade. The cut of paper, laminated paper, canvas, buckrum, cardboard, etc. is always perfect.